User manual

Page 22 of 54 Universal Motor Controller UMC-4 – User Manual – V 02/2015
Menu Navigation
To access a new menu level, press the SELECT soft button. To go one
level back up, press the BACK soft button.
Use the up/down arrow soft buttons to navigate through the menu.
A parameter has its value displayed on the right hand of the screen. Edit it
with the CHANGE soft button. Cancel an edit action by pressing the BACK
(or depending on the context, the CANCEL) soft button.
POWER/LOCK Button
Press and release to switch the UMC-4 on; to switch off the UMC-4, the
button must be pressed for three seconds, and a countdown is displayed. If
the button is released before the countdown has elapsed, the UMC-4 does
not shut down.
Press and release the POWER/LOCK button twice to lock or unlock the
user interface. A lock or unlock status symbol will be displayed.
HOME Button
Press the HOME button to enter the Home screen.
USER Button
Press the USER button to enter the User screen, providing user-definable
function shortcuts.
MENU Button
Press the MENU button to enter the UMC-4 main menu. The main menu
includes sub menus for system setup, firmware updates, Lens Data
Archive, and more.