User manual

Page 10 of 54 Universal Motor Controller UMC-4 – User Manual – V 02/2015
Vital Precautions
NOTICE: Read and follow all instructions before using the product. Use the
product only as described therein. Never open it. Never insert objects.
Never attempt to repair the product: Always have it repaired and serviced
by authorized ARRI Service Centers.
Never remove or deactivate any product safety equipment (incl. guarantee
stickers).
Always protect the product from moisture, cold, heat, dirt, vibration, shock,
or aggressive substances.
General Precautions
Use only the tools, materials and procedures recommended in this
document. Unplug all cables during transport.
Do not store the UMC-4 in places where it may be subject to temperature
extremes, direct sunlight, high humidity, severe vibration, or strong
magnetic fields.
Audience and Intended Use
NOTICE: The product is solely and exclusively available for commercial
customers and shall be used by skilled personnel only. Always contact
ARRI preceding other uses. Every user should be trained according to
ARRI guidelines.
The UMC-4 is a motor controller solely and exclusively for iris, focus or
zoom control and lens data capture:
• Wireless via ARRI white radio modem
• Wired via ARRI LCS connection, serial or Ethernet interfaces
Never use the product for any other purpose. Always follow the valid
instructions and system requirements for all equipment involved.