Instruction manual

Options Menu
The Options Screen holds special user dependent
functions as well as the Software Version information.
Button Usage programs the LIM buttons to either setting
Limits or adding Lens Scale Offset used in UMC-3(A) 3D
applications or correction of Lens Data Archive scales.
Knob controls either the Focus or Iris lens motor.
The respective other axis will be directed to the Slider.
Knob and Slider may be set to clockwise or counter-clock-
wise direction operation.
Note: To allow the use of seperate WCU-3‘s for Focus
and Iris control, control should be set up like this:
WCU-3 #1: Knob controls Focus -> controls Focus Lens Motor
WCU-3 #2: Knob controls Iris -> controls Iris Lens Motor
15
Operation
The Display Alignment allows the display view to be turned
upside down for easier use for left-handed people.
For even more convenient handling of the WCU-3 also turn
the side handle by 180°. Use a 3mm hex wrench for the
handle adjustment.
Note: Due to the upside down orientated antenna, the
transmission range may be reduced.
i screen
screen
WCU-3 Software and Hardware Version information
EXIT symbol
Highlight the chosen item and confi rm your selection by
briefl y pressing the jog wheel button.
Highlight the , i or symbol and press to select the
sub-screens or return to the Status Screen.