Instruction manual

14
Operation
Slide in the battery into its compartment. Switch on the
WCU-3 using the blue ON button.
The Status Screen appears and the WCU-3 tries to
connect to a matching partner unit. If ok, CALibrate the
lens motor(s) and the WCU-3 is ready for operation.
Some user-defi nable functions can be adjusted through a
simple menu system.
4.1 Screen Menus (WCU-3 SW packet 02A)
Enter the WCU-3 Main Menu by briefl y pressing the
jog wheel button.
The Main Menu Screen appears.
4. Operation
Highlight one of the provided menu items by turning the
jog wheel, push briefl y the jog wheel button to enter the
next menu level or select the EXIT symbol and press to
return to the Status Screen.
Backlight Menu
The display illumination can be adjusted to 3 brightness
levels or may be switched off completely.
Select the desired brightness level, press, then highlight the
EXIT symbol and press to return to the Status Screen.
Channel Menu
Select the radio channel or switch off the radio by turning
the jog wheel. Press to return to the Status Screen.
“Yellow Radio“ screen “White Radio“ screen
For a detailed description of the ARRI wireless system setup refer to
chapter 5.ff
EXIT symbol