Instruction manual

3.2 Control scope

Wireless

Compatible partner units

Radio Type vs. min. SW Version

„Yellow“ „White“

WCU-3 Packet 02A 02A

ALEXA Plus/Studio SUP 3.1 3.1

ARRIFLEX

435 Adv w. FEM-2

Packet 03D 04A

ARRIFLEX

435 Xtreme

Packet 03D 04A

ARRIFLEX 416 Plus (HS) Packet 03B 04A

ARRICAM w. LDB-ST/LT Packet 04D 05A

D21 with FEM-2 Packet 1.17 *

UMC-3(A) Packet 02F 04A

UMC-1 w. URM-2/-3 Firmware 1.60 ---

* D21 (SW-Packet 1.17) with FEM-2 Packet 3.00

The ZMU-3(A) extends the WCU-3‘s control capabilities to an

additional zoom control, being powered from the WCU-3‘s

battery.

Note:

Radio communication is only possible between equally color

coded radio units:

“Yellow Radio“ to Yellow Radio“,

“White Radio“ to “White Radio“

Hardwired

Using the ARRI LCS-Bus wiring, the WCU-3 accepts the

Cameras/Lens Motor Control Units (UMC-X) mentioned in the

„Wireless Section“ as well as the units listed below for control

and/or communication.

Mixed wireless and wired control

Wireless control of axis not LCS-wired is also possible

WCU-3 acessory units

ZMU-3 (A) Firmware 02C

ZMU-1/-2 Firmware 2.09

CLM-1 Firmware 2.18

UMC-1 Firmware 1.60

To tap the full potential of the WCU-3‘s possibilities, be sure to

having updated all connected units to a software version equal

or higher to those listed.

For setup details please refer to chapter 5.

General Description