Specifications
6 SXU‐1SingleAxisUnit
1.3 General precautions
NOTICE: The product is designed for all cameras with the ARRI Lens Control
System LCS or Universal Motor Controller UMC-3A. For use with other
cameras, consult the respective manufacturer.
Use only the tools, materials and procedures recommended in this
document. For the correct method of use, see your camera manuals.
1.4 Audience and intended use
NOTICE: The product is solely and exclusively available for commercial
costumers and shall be used by skilled personnel only. Always contact ARRI
preceding other uses. Every user should be trained according to ARRI
guidelines.
The SXU-1 is a single-axis hand unit solely and exclusively for iris,
focus or zoom control:
Wireless via ARRI white radio modem (see p. 11)
Wired via ARRI Lens Control System LCS
Note: For use with other systems, consult the respective
manufacturer
Never use the product for any other purpose. Always follow the valid
instructions and system requirements for all equipment envolved.
1.5 System requirements
NOTICE: To tap the full potential, have all connected units updated to a
Software Update Packet SUP equal or higher to those listed below.
Basic Torque adjust Motor direction switch
ALEXA (XT)
Plus/Studio
7.0 8.0 9.0
UMC-3A
04B 04C
ARRICAM +
LDB-ST/LT
06A
ARRIFLEX
435 Xtreme
05A
ARRIFLEX
416 Plus (HS)
04A