Specifications

SXU‐1SingleAxisUnit 27
3. With control knob (C), turn lens axis to desired end position.
4. Press K-LIM (D) again
5. Blinking changes to an icon: Limits are set.
6. To reset: Press K-LIM (D) again.
NOTICE: To set control knob limits, you can also keep K-LIM pressed from
start to end position. Knob and motor limits can be combined.
7.4 Recording
1. Check LED (1) for camera standby:
Solid green Ready-to-roll
Flashes red Pre-recording
Solid red Recording
Flashes green and red Error
Out Disconnected
2. Press REC (1) to start or stop.