Specifications

26 SXU‐1SingleAxisUnit
3. With control knob (C), turn lens axis to desired end position.
4. Press LIMIT (D) again.
5. Blinking changes to an icon: Limits are set.
6. To reset: Press LIMIT (D) again.
NOTICE: To set motor limits, you can also keep LIMIT pressed from start to
end position. Motor and knob limits can be combined.
7.3 Limiting the control knob range
Limiting the control knob range allows faster lens reactions.
1. With control knob (A), turn lens axis to desired start position.
2. Press K-LIM once (B) until blinking.