Specifications

SXU‐1SingleAxisUnit 21
6.7 Calibrating to lens
NOTICE: Each change of lens requires new calibration, including torque and
sometimes motor direction. To avoid damage, always calibrate motors to a
new lens.
1. Press CAL (A) for at least three seconds.
2. Display will count down to zero (B).
3. CAL blinks up CALIBRATING (C).
4. Lens motor moves lens ring from one end to the other.
5. CAL (D) reappears solid.
6. Calibration complete.
NOTICE: To interrupt calibration, release CAL button during count-down.