Specifications
16 SXU‐1SingleAxisUnit
6 Prior to operation
6.1 Before each switch-on
NOTICE: Always prepare the camera first: Connect lens motors and motor
controller with white radio according to valid camera manual. Only then,
should you connect the camera to the product.
6.2 After each change of lens
NOTICE: Each change of lens requires a new calibration. The display will
automatically prompt you: “Calibrate motor now?” If not: Check connection to
camera. For calibration, see p. 21. If necessary:
Change motor direction (left, right), see p. 23
Manually recalibrate, see p. 21
Change motor torque (1 to 4), see p. 22
6.3 Switching on and initialization
NOTICE: A full initializon always ends with a full automatic calibration. If not:
Connect product properly to camera. Check for:
Correct white radio channel (0 to 7, or off), see p. 18
Correct lens axis (focus, iris, zoom, or off), see p. 20
Correct motor direction (left, right), see p. 23
If necessary, calibrate manually (see p. 21).