Instruction manual

1x / INT switch

EXPOSURE key

BURST FRAMES

exposure time

1/SEC SEC switch

Interval Time

HRS:MIN / MIN:SEC

switch

Singleframe Handcontrol

7.3 Intervallometer

Operation

For intervallometer operation the 1x / INT switch ➪ photo

is set to the INT position. The interval time begins running,

the integrated capping shutter opens and a certain number

of singleframes is recorded. After the set interval time has

ended the process is repeated and the same number of

singleframes is recorded. This operational mode is com-

pletely automatic and continues until the 1x / INT switch

is returned to the 1x position.

The interval time is defined as follows: it extends from the

opening of the Integrated Capping Shutter for the first single-

frame of a singleframe cycle to the opening of the Integrated

Capping Shutter for the first singleframe of the next single-

frame cycle.

7.3.1 Setting the Repeat Counter (burst)

The repeat counter sets the number of singleframes to be

recorded in a cycle.

• Set the desired number with the BURST FRAMES switches.