Instruction manual

Singleframe Handcontrol

• Set the desired exposure time with the EXPOSURE

TIME keys ➪ photo.

• With the 1/SEC SEC switch ➪ photo, select if the

exposure time is displayed as whole seconds or as

fractions of a second.

7.2.3 Recording Singleframes

• Press the exposure key ➪ photo.

After pressing the exposure key the Integrated Capping

Shutter opens. Then the number of singleframes set on the

BURST FRAMES switch will be recorded with the set ex-

posure time. After the last singleframe the Integrated

Capping Shutter closes again.

• For further singleframes press the exposure key again.