Instruction manual

29
1x / INT switch
EXPOSURE key
BURST FRAMES
exposure time
Singleframe Handcontrol
7.2 Recording Singleframes
(Photographic Mode)
When recording singleframes, a certain number of single-
frames is recorded directly in sequence each time the ex-
posure key is pressed. Then the Singleframe Hand Control
waits until the exposure key is pressed again.
• The 1x / INT switch ➪ photo must be at the 1x position.
7.2.1 Setting the Repeat Counter (burst)
The repeat counter ➪ photo sets the number of singleframes
which will be recorded each time the exposure key ➪ photo
is pressed.
• Set the desired number with the BURST FRAME keys
➪ photo.
On the repeat counter, values from 0 to 99 frames can be set.
Note: If the repeat counter is set to 0, one frame will
still be recorded when the exposure key is pressed.