Instruction manual

1x / INT switch

SF ON / OFF switch

RDY LED

Singleframe Handcontrol

7.1 Switching on

Singleframe Operation

Before switching on singleframe operation,

ensure that the singleframe guide is correctly

installed, that the plate on the Integrated Capping

Shutter can be moved easily, that the Singleframe

Film Recognition module is attached, that the

cover for the openings in the film gate is correctly

attached and that the eyepiece is closed (see

chapter Preparing the ARRIFLEX 435 for Single-

frame Shots).

• Turn the 1x / INT ➪ photo switch to 1x.

• Turn the SF switch to ON ➪ photo;

the RDY LED ➪ photo illuminates red briefly (initialising),

then green.

Note: When singleframe operation is switched on, the

Integrated Capping Shutter is controlled automa-

tically by the Singleframe Hand Control and can

therefore not be operated manually.