Instruction manual

17
door locked
26 pin socket
Installation
• Press the control knob of the Integrated Capping Shutter
and turn it until the black plate disappears in the ICS
door. Close and lock the ICS door.
To prevent inadvertent opening of the camera
door, it can only be opened when the Integrated
Capping Shutter is open.
• Press the control knob of the Integrated Capping Shutter
and turn. The plate will be pushed slowly into the ICS-
Guide. Pay attention to proper and smooth operation.
• Plug the cable of the Integrated Capping Shutter into
the 26-pin socket ➪ photo on the lower right side of
the camera and screw tight.