Instruction manual

ARRI WCU-4 User Manual8

3.2 Specific Safety Instructions

• Do not remove any safety measures from the system!

• Do not operate the system in areas with humidity above operating levels

or expose it to water or moisture!

• Do not subject the system to severe shocks!

• Do not place the system on an unstable trolley/hand truck, stand, tripod,

bracket, table or any other unstable support device! The system may fall,

causing serious personal injury and damage to the system or other ob

jects.

•

Operate the system using only the type of power source indicated in the

manual! Unplug the power cable by gripping the power plug, not the cable!

• Never insert objects of any kind into any part of the system if not clearly

qualiﬁ ed for the task in the manual, as objects may touch dangerous

voltage points or short out parts! This could cause ﬁ re or electrical shock.

• Unplug the system from the power outlet before opening any part of the

system or before making any changes to the system, especially the

attaching or removing of cables!

• Do not use solvents to clean!

• Do not remove any stickers or paint-marked screws!

3.3 General Precautions

Storage and Transport

• All cables have to be unplugged from the WCU-4 when it is transported or

stored inside a case.

• Do not store the WCU-4 in places where it is subject to extreme

temperatures, direct sunlight, high humidity or severe vibration, or near

strong magnetic ﬁ elds.