Instruction manual

ARRI WCU-4 User Manual 27
The ZOOM sub-menu allows the setting of LIMITs, LOCKing the zoom to a set value
and limiting the maximum zoom speed.
Symbols next to the LIMIT softbutton item indicate that LIMIT or LOCK is active.
LOCK Press to lock the current Zoom position.
- A padlock symbol will indicate the LOCK status
LOCK Press again to clear the LOCK function.
How to use the LIMIT function:
LIMIT Press to store the current Zoom position.
- LIMIT starts blinking and a LIM symbol appears
- Drive motor to the second LIMIT position
LIMIT Press to store the current Zoom position.
- LIMIT and the LIM symbol stop blinking*
LIMIT Press again to clear the LIMIT positions.
How to use the maximum Zoom speed function:
Press to enter the zoom speed sub-menu.
UP or
DOWN Press to select the maximum zoom speed.
Press and hold to change the speed in
steps of tens.
SET Confi rm the selection.
* An alternate method to set LIMITs is to press and hold the LIMIT button on the fi rst
position, move to the second position and release the LIMIT button then.
Note: LOCK can be set within the LIMIT borders, even when LIMIT is active, and will override the
LIMIT function in this case.
8.6 Menu ZOOM