Instruction manual

ARRI WCU-4 User Manual26
The IRIS sub-menu allows the setting of LIMITs and LOCKing the Iris to a set value.
If LIMIT is set, the complete slider travel is available for the limited Iris range, thus
stretching the Iris scale.
Symbols next to the LIMIT softbutton item indicate that LIMIT or LOCK is active.
How to use the LIMIT function:
Shift the slider to the fi rst LIMIT position.
LIMIT Press to store the current Iris position.
- LIMIT starts blinking and a LIM symbol appears
Adjust slider to the second LIMIT position.
LIMIT Press to store the current Iris position.
- LIMIT and the LIM symbol stop blinking*
LIMIT Press again to clear the LIMIT positions.
LOCK Press to lock the current Iris position.
- A padlock symbol will indicate the LOCK status
LOCK Press again to clear the LOCK function.
* An alternate method to set LIMITs is to press and hold the LIMIT button on the fi r s t
position, move to the second position and release the LIMIT button then.
Note: LOCK can be set within the LIMIT borders, even when LIMIT is active, and will override the
LIMIT function in this case.
8.5 Menu IRIS
Sub-Menu SYSTEM INFO
This screen shows the installed WCU-4 fi rmware version,
network (MAC) address and fi rmware version of the installed radio module,
and the MAC address(es) of the connected device(s).
Shown settings:
WCU-4:
Software version and date
Internal radio module:
Radio network address and fi rmware version
Connected camera/UMC-3A:
Radio network address
WCU-4:
Serial number