Instruction manual

ARRI WCU-4 User Manual 25
INSTALL a license
A licensed feature is bound to the WCU-4’s hardware serial
number.
Before purchasing a license key, you must save the WCU-4’s
hardware info fi le for upload during the purchasing process.
Select LICENSED FEATURES from the FIRMWARE menu.
Install an SD card and press the HWINFO softbutton.
A fi le named “K2.72103.0-#### -wcu4.ipkg” will be generated,
with #### being the WCU-4 serial number.
Visit the ARRI LICENSE SHOP at http://alshop.arri.de and
follow the instructions for purchasing and downloading
license keys.
Available licenses for WCU-4 currently include:
ALEXA Remote License Key (K2.72145.0)
To install the new license(s) after purchase, copy the license
fi le to the SD card, using the above described folder structure.
Install the SD card and again select LICENSED FEATURES
from the FIRMWARE menu.
Press the INSTALL softbutton and select a license fi le from
the INSTALL LICENSE screen using the UP/DOWN
softbuttons, if necessary.
Press the INSTALL softbutton again, then confi rm
your selection by pressing both INSTALL softbuttons.
DELETE a license
Press the DELETE softbutton and select a license fi le from the
DELETE LICENSE screen, using the UP/DOWN softbuttons.
Press the DELETE softbutton and select a license fi le from
the DELETE LICENSE screen using the UP/DOWN
softbuttons, if necessary.
Press the DELETE softbutton again, then confi rm your
selection by pressing both DELETE softbuttons.
Once purchased, a license key can be re-installed again to the
linked WCU-4 at any time.
LICENSES