Instruction manual

ARRI WCU-4 User Manual 23

Sub-Menu USER BUTTON

The WCU-4’s user button may be assigned to different functions.

UP or

DOWN Select the User Button function.

SET Conﬁ rm the selection.

ZOOM zap Function (Zoom full speed).

KNOB marker Set new marker on knob scale.

Sub-Menu BACKLIGHT

The WCU-4 display and knob scale illumination may be dimmed to operational needs.

The backlight intensity may be set to a ﬁ xed value or automatically up to a pre-set

maximum value, ambient light dependent.

MODE Toggles between FIX and AUTO mode.

UP or

DOWN Change the illumination intensity from 0 to 10.

SET Conﬁ rm the selection.

Sub-Menu USER SETTINGS

Up to six user settings may be stored and recalled on/from an SD card

The WCU-4 can also be re-set to the factory settings.

UP or

DOWN Select LOAD, SAVE or factory reset.

ENTER The LOAD or SAVE sub-menu or

reset to factory settings.

UP or

DOWN Select the setting number.

SAVE The highlighted setup to SD card.

LOAD The highlighted setup from SD card.

marked settings have been saved previously and can be

overwritten without request.

Sensor