Instruction manual

Changing Time Code User Bits

• Depress key “2” - “USERBITS” is displayed against a

dark background.

• Depress the “ENTER”-key - the camera control unit is

ready for input of the new user bits.

• Enter up to 8 user bits with figures 0-9 or letters A-F -

the new user bits are displayed. Confirm the input by

depressing the “ENTER”-key; all unfilled digits will

default to zero.

• Transfer the new user bits to the camera with the

“SEND”-key.

Note: On productions lasting several days we recom-

mend that the date and the camera number be

entered as user bits (e.g. 280895C1) in order

to ensure clear identification of the film stock.

The OPTIONS Menu

The OPTIONS menu allows access to the sub-menus

ASYNC-MODE, LENGTH UNIT, END WARNING and

COUNTER DISPLAY MODE.

Note: The menu point END WARNING is not available

on the ARRIFLEX 435/435ES.

• With the keys “1” to “4”, select the desired function.

ASYNC-MODE

The ASYNC mode enables switching the warning signal

for asynchronous running on and off. There are four

possibilities available:

Warning tone Warning tone

on camera start on camera stop

1off on

2on off

3on on

4off off

• Select the desired setting with the corresponding key.

• Transfer the chosen setting to the camera with the

“SEND”-key.

Accessories