Instruction manual

Heated Eyecup HE-3

The heated eyecup prevents the eyepiece ➪ photo from

fogging in low temperatures e.g. when filming outdoors

in winter.

• Pull the normal eyecup off the eyepiece, then place the

heated eyecup on the eyepiece.

• Plug the heated eyecup either

with cable KC-26S to the 11-pin accessory socket, or

with cable KC-42S to the RS-socket.

• Set the heating level with the toggle switch ➪ photo:

“LO”: low heat output

“HI”: higher heat output.

If the camera and accessories are powered by

battery, it is recommended to switch off the

eyecup-heating during extended breaks in filming.

Remote Run Switch RS-4

• Attach the remote run switch with the spring clamp

➪ photo (e.g. to the pan handle).

• Plug the RS-4 plug into the “RS”-socket.

Accessories