Instruction manual

• Lock the magazine completely into the camera opening.

Note: The magazine drive gear engages automatically.

Lightly turning the knurled knob on the movement

block facilitates the precise engagement of the

gear wheel if necessary.

• Check that the magazine is firmly seated.

• With your right hand pull the film loop downwards out

of the camera ➪ photo. Then push it as far upwards as

possible until the loop can be positioned between the

movement plate and the film gate.

Note: The film cannot yet be completely placed into the

film channel.

• Turn the knurled knob ➪ photo on the movement until its

marking matches that on the movement block.

• Turn the movement locking lever towards the “OPEN”

position to swing the movement block away from the

film gate.

Camera Body

knurled knob knurled knob