Instruction manual

41
Movement
The ARRIFLEX 435 Advanced features a highspeed 5-link
movement, equipped with ball-bearings for low maintenance.
Never operate the movement locking mechanism
while the camera is running!
Removing the Spacer Gate
• Press the safety spring ➪ photo downwards, at the same
time pressing the spacer gate backwards by its handle
➪ photo. Then remove by pulling upwards.
Installing the Spacer Gate
• Take hold of the spacer gate by its handle ➪ photo and
insert it at an angle from above into the movement block.
• Push the spacer gate downwards until it locks audibly
in place.
Camera Body
spacer gate
safety spring
handle