Instruction manual

Battery NC 24/7 R

The battery NC 24/7 R has a capacity of 7 ampere-hours

and is suitable for frame rates up to 130 fps.

• Ensure that the main switch on the camera is off.

• Plug the battery cable KC 20S or the spiral battery

cable KC 29S into the power supply socket on the

camera and into the battery-socket.

Note: If the battery voltage is not sufficient for the

chosen frame rate, the “bat” symbol will show

in the camera display.

Charger NCL 24 R

With this charger all ARRI 24 V batteries can be charged.

• First check whether the correct mains voltage is set on

the charger.

• Connect the charger to the mains supply.

• Plug the charger cable into the battery socket.

• Press the start button.

Indication of the LEDs

LED Indication

yellow discharging (1A)

red charging

green charger connected to the mains

Power Supply