Specifications

2. Status Indicators
Arriflex 535B Quick Guide, 4/99, Page 6
Viewfinder Indicators: END blinking:Film end coming up in X feet/meters (“X” can bet set by user)
END glows: Camera ran out of film
ASY: Asynchronous operation; camera is not running at set fps rate
BAT: Low battery (less than 20 volts). Exchange battery.
Display Indicators: TC glows: Timecode exposure is enabled and timecode is set
TC blinks: Timecode exposure is enabled, but not recording properly
bat: Low battery (less than 20 volts). Exchange battery.
asy: Asynchronous operation; camera is not running at set fps rate
end flashes Film end coming up in X feet/meters (“X” can be set by user)
end glows: Camera ran out of film
fps flashes: ESU is not receiving a valid signal
PROG glows: Internal program is activated
Display Warnings: The LCD Display will indicate any situations that will prevent running the
camera by changing one or more of its digits into underlines.
0 0 0 0
_ 0 0 0
ft
fps
Magazine
improperly attached
Magazine
not ready
Magazine
communications check
Movement block
not locked
Film jam in
upper loop area
Sprocket guides
are open
Film jam in lower
loop area, or film end