Specifications
Studio Center Handle
Universal Low Mode Set
Lite Center Handle
ARRICAM System Guide 47
Studio Center Handle
When the Lite Viewfinder is mounted on the Studio camera, the Back Load
Adapter must be used. In that case, the Back Load Adapter handle has to be
removed. The Studio Center Handle can then be used instead of the Studio
Camera Handle. It is attached with two screws to each side of the Studio
camera body and with two screws to the Back Load Adapter (use 3mm
hex key). The accessory cube provides 3/8” threaded holes for mounting
various accessories.
Compatibility: This handle fits only on the Studio camera with the Lite
Viewfinder or Lite Universal Viewfinder attached and Back Load Adapter
with handle removed.
K2.54081.0 Studio Center Handle
Lite Center Handle
When the Studio Viewfinder is mounted on the Lite camera, the Studio
IVS interferes with the Lite Camera Handle. The Lite Center Handle
can then be used instead of the Lite Camera Handle. It’s accessory cube
provides 3/8” threaded holes for mounting various accessories.
Compatibility: This handle fits only on the Lite camera. It can be used
with the Lite Viewfinder or Lite Universal Viewfinder if the Lite IVS is
not attached, or with the Studio Viewfinder or Studio Universal Viewfinder
with or without the Studio IVS.
K2.54082.0 Lite Center Handle
Universal Low Mode Set
The Universal Low Mode Set allows the ARRICAM Studio or Lite camera
to be underslung on a Steadicam or other camera support device.
Compatibility: On the Studio camera, the left and right arms mount directly
to the camera body. On the Lite camera, the Lite Mounting Plate has to
be attached to the camera body first, and then the left and right arms
are attached to the Lite Mounting Plate.
The Universal Low Mode Set is compatible with all ARRICAM
viewfinders, all ARRICAM video assists and all 100% Video Tops. For
mounting the Support Rod Bracket the Studio 100% Video Top or the
Lite 100% Video Top needs to be present.
On the Lite camera with Universal Low Mode Set, the Studio
Magazine 300/1000 can’t be used.
K2.52214.0 Universal Low Mode Set
09 / 2003










