Specifications

Shoulder Set
Studio Camera Handle
Shoulder Pad
46 ARRICAM System Guide
Mechanical Accessories
Lite Camera Handle
09 / 2003
Shoulder Set
A short bridgeplate with a tripod quick release plate on the bottom and
two handles that are adjustable up/down and can be flared out.
Compatibility: Works with both ARRICAM Studio and Lite. Without
shoulder pad it can also be used on all ARRIFLEX cameras. The RUN
button on the right handle can be connected to the Fisher 3 pin RS
connector and provides camera run/stop functionality.
K2.54023.0 Shoulder Set (includes Shoulder Pad)
Shoulder Pad
A soft foam pad for handheld applications.
Compatibility: The Shoulder Pad is mounted directly to the base of the
ARRICAM Studio or Lite. It cannot be used with the Lite Steadicam
Magazine.
K4.54469.0 Shoulder Pad
Studio Camera Handle
This handle is attached to the ARRICAM Studio with three screws
(use 3mm hex key). Two accessory cubes provide 3/8” threaded holes for
mounting various accessories, including the 3/8” Accessory Shoe Adapter.
The two outer handle segments can be removed with a 5mm hex key
and freely positioned on the accessory cubes.
Compatibility: Fits on the Studio camera with Studio Viewfinder or Studio
Universal Viewfinder. Fits on Studio camera with Lite Viewfinder if Lite
IVS is not attached. Does not fit on Studio camera with Lite Viewfinder
if Lite IVS is attached. Does not fit on Lite camera.
K2.54064.0 Studio Camera Handle
Lite Camera Handle
This handle is attached to the ARRICAM Lite with two screws (use 3mm
hex key). The upper handle can be swiveled or completely removed.
The accessory cube provides 3/8” threaded holes for mounting various
accessories, including the 3/8” Accessory Shoe Adapter.
Compatibility: Fits only if the Lite Viewfinder or Lite Universal Viewfinder
are mounted to the Lite camera. Does not fit if the Studio Viewfinder or
the Studio Universal Viewfinder are on the Lite camera. In that case,
use the Lite Center Handle.
K2.54078.0 Lite Camera Handle