Specifications

Timing Shift Box (TSB)
Remote Control Station (RCS)
32 ARRICAM System Guide
Timing Shift Box (TSB)
The Timing Shift Box adjusts the phase relationship of the mirror shutter
to the movement. The result is that the film is exposed while being trans-
ported, which creates a streaking effect. A unique feature of the Timing
Shift Box is the Jitter function. It introduces a random fluctuation in the
timing shift, resulting in a fluctuation of the length of the streak.
Compatibility: This box attaches directly to the Studio camera or the
Remote Control Station, and can be connected to the Studio or Lite camera
with the MCB Cable Adapter and the Speed Control Box Remote Cable
KC-65 (3m/9ft) or KC-69 (15m/45ft), with or without the 50m/150ft
Cable Drum KC-73.
The Timing Shift Box has to be removed to attach or remove the Speed
Control Box from the Studio camera. If a magazine is attached in back
load position to the Studio camera, the magazine has to be removed before
the Timing Shift Box can be attached or removed.
Timing Shift Box, Manual Control Box and Speed Control Box can be
used simultaneously.
K2.54171.0 Timing Shift Box
Remote Control Station (RCS)
The Remote Control Station is an adapter plate that allows the use of a
variety of accessories remotely. The connection of the Remote Control
Station to the CAC connector of the camera body is simply achieved
by one Speed Control Box Remote Cable KC-65 (3m/9ft) or KC-69
(15m/45ft), with or without the 50m/150ft Cable Drum KC-73.
Compatibility: These accessories can be mounted directly to the Remote
Control Station: Speed Control Box, Manual Control Box or Timing
Shift Box, Lens Data Display Classic or Lens Data Display for the Focus
Puller. In addition the WHA-2 can be connected with cable LC-M1,
LC-M2, LC-Z1 or LC-Z2. The hand units of the wireless Lens Control
System (WFU-1 and/or WZU-1) or the Wireless Remote Control (WRC-1)
can be attached to the WHA-2.
Two 3/8” threaded holes on the backside of the Remote Control Station
can be used to mount it in a variety of positions, e.g. on the camera’s left
side or on the Lite Camera Handle.
The WHA-2 connector on the Remote Control Station is meant ONLY
for the WHA-2. It is not compatible with the Zoom Main Unit (ZMU-1)
or the Controlled Lens Motor-1 (CLM-1).
The SYNC function of the Speed Control Box does not work when the
Cable Drum is used. It will work, however, when the 15m/45ft or the
3m/9ft Speed Control Box Remote cable is used.
K2.54143.0 Remote Control Station
09 / 2003