Specifications

Heated Eyecup
2” Video Monitor
6.6” Video Monitor
28 ARRICAM System Guide
Heated Eyecup
An eyecup with a built-in heating element, operating on 24V. It can be
set to OFF, HI or LO.
Compatibility: The ARRICAM Heated Eyecup fits on all eyepieces of
the ARRICAM viewfinder system. The cable pictured connects from the
heated eyecup (Fischer connector) to the ARRICAM (LEMO Mini
Coax connector). This heated eyecup also fits on ARRIFLEX cameras,
but then the traditional heated eyecup cable (Fischer to Fischer) must
be used. The ARRIFLEX heated eyecups fit on the Lite Eyepiece and
the Lite Universal Eyepiece, but NOT on the Studio Eyepiece.
Note: The ARRICAM heated eyecup uses the same Mini Coax con-
nector as the Work Light.
K2.54002.0 Heated Eyecup (includes cable KC-63-S)
6.6” Video Monitor
This 6.6” LCD color video monitor with a high quality extremely bright
image automatically detects and switches between PAL and NTSC.
The image can be flipped upside down, in case the monitor is hung
upside down.
Compatibility: Can be mounted anywhere. The bracket of its flexible
arm fits any accessory shoe on the camera. Connects to the MINI
MONITOR connector on all ARRICAM and ARRIFLEX Integrated
Video Systems.
K2.54031.0 6.6” Video Monitor
2” Video Monitor
A 2” LCD color video monitor with adjustments for brightness and color.
Compatibility: Can be mounted anywhere. The bracket of its arm fits
any accessory shoe on the camera. Connects to the MINI MONITOR
connector on all ARRICAM and ARRIFLEX Integrated Video Systems.
K2.54040.0 2” Video Monitor PAL
K2.54035.0 2” Video Monitor NTSC
09 / 2003