Specifications
09 / 2003
Studio Integrated Video System (IVS)
Studio Mask Frameglow
Studio 100% Video Top
24 ARRICAM System Guide
Studio Integrated Video System (IVS)
A color video assist that shares all the 435 IVS II features, including frame
line and text insertion and direct accessible buttons for the most common
functions. In addition, it has a one-knob interface for further menu functions,
is flicker free from 5 to 60 fps, has manual color balancing and a video
shutter which can be synchronized to the camera shutter. The inserted
text lines can be configured to provide on-screen information about
camera status, In-camera Slate information, timecode and LDS.
Compatibility: Fits on Studio Viewfinder, Studio Universal Viewfinder
and Studio 100% Video Top. Functions and features are identical to the
Lite IVS. When used on the Lite Camera, the Lite Camera Handle must
be replaced with the Lite Center Handle.
K2.54041.0 Studio IVS PAL
K2.54042.0 Studio IVS NTSC
Studio 100% Video Top
This module can be attached to the ARRICAM Studio or ARRICAM Lite
instead of a viewfinder when only video assist and no optical viewing is required.
The Studio IVS attaches to this module. All available light will be routed
to the video assist, and thus a better image quality can be achieved. The
optical system can be easily switched to Super 35 by replacing a plate
between Studio 100% Video Top and camera body.
Compatibility: Can be mounted on the ARRICAM Studio or on the
ARRICAM Lite. When used with Studio IVS on the Lite Camera, the Lite
Camera Handle must be replaced by the Lite Center Handle. Mounting
holes for the Support Rod Bracket of the Universal Low Mode Set are
provided on the front side. The Studio Readout, the Studio LCD Frameglow
Module and the Studio Mask Frameglow cannot be attached.
K2.54033.0 Studio 100% Video Top
Studio Mask Frameglow
This module attaches to the Studio Viewfinder or the Studio Universal
Viewfinder. Physical masks slide into the module and determine the frame
lines that are illuminated. The brightness of these frame outlines can be
varied with the DIMMER knob.
Compatibility: Fits on the Studio Viewfinder or the Studio Universal
Viewfinder. Cannot be used with Studio 100% Video Top. Except for
three masks each, the masks for Studio Mask Frameglow and Lite Mask
Frameglow are identical.
K2.54017.0 Studio Mask Frameglow
Studio LCD Frameglow
This module attaches to the Studio Viewfinder or the Studio Universal
Viewfinder and provides 4 different types of preset illuminated frame outlines:
Academy (1.37), TV (1.33), HDTV (1.78) and Wide screen (1.85). Two of them
can be on at the same time. Their brightness can be varied with the DIMMER knob.
Compatibility: Fits on the Studio Viewfinder or the Studio Universal
Viewfinder. Cannot be used with Studio 100% Video Top. The preset
formats are in Normal 35 only.
K2.54007.0 Studio LCD Frameglow
Studio LCD Frameglow










