Specifications

09 / 2003
Studio Readout
Studio Zoom Extension
Studio Anamorphic Extension
Studio Medium Extension
ARRICAM System Guide 23
Studio Zoom Extension
Extends the distance between viewfinder and eyepiece about
30cm / 11.8 inches. Turning the ring zooms the image from normal size
to 2x magnification.
Compatibility: Fits on Studio Viewfinder, Studio Universal Viewfinder
and Lite Universal Viewfinder. Uses the ARRIFLEX Eyepiece Leveler.
K2.54004.0 Studio Zoom Extension
Studio Medium Extension
Extends the distance between viewfinder and eyepiece about 15cm / 5.9 inches.
Compatibility: Fits on Studio Viewfinder, Studio Universal Viewfinder
and Lite Universal Viewfinder. Uses the ARRIFLEX Eyepiece Leveler.
K2.54005.0 Studio Medium Extension
Studio Anamorphic Extension
Extends the distance between viewfinder and eyepiece about 30cm / 11.8 inches.
Turning the ring zooms the image from normal size to 2x magnification.
An anamorphic element can be switched into the light path.
Just like the 435 Anamorphic Viewfinder, the ARRICAM Studio and Lite
Universal Viewfinders only show a correctly de-squeezed, rotated and
shaped image when the viewfinder arm is in the horizontal position, either
on the left or right side of the camera. If the viewfinder arm is between
these two positions the image is distorted. This distortion cannot be cor-
rected with the manual image rotation control. The situation is different
when using the ARRICAM Studio Anamorphic Extension to de-squeeze
the image. When the viewfinder arm is anywhere between the horizontal
and vertical positions, image squeeze and shape distortions can be com-
pensated for with the manual image rotation control, even though this will
result in a rotated image. When the viewfinder arm is in the vertical posi-
tion (the eyepiece is above the camera), a properly squeezed, rotated and
shaped image can be achieved by taking the Studio Anamorphic Extension
off the viewfinder, rotating it 90 degrees, and re-attaching it.
Compatibility: Fits on Studio Viewfinder, Studio Universal Viewfinder
and Lite Universal Viewfinder. Uses the ARRIFLEX Eyepiece Leveler.
K2.54018.0 Studio Anamorphic Extension
Studio Readout
The Studio Readout mounts on top of the Studio Viewfinder or the Studio
Universal Viewfinder. On the left side it shows camera speed, shutter angle
and exposed film, plus a RUN and a BAT LED. By pushing the RAW
STOCK button, the magazine raw stock can be displayed. By pushing the
BRIGHT button, the brightness of all LED displays on the camera can be
adjusted. On the right side the Studio Readout shows camera speed and a
RUN LED. On the left a connector for the Lens Data Displays is provid-
ed.
Compatibility: Fits on the Studio Viewfinder or the Studio Universal
Viewfinder. Does not fit on Studio 100% Video Top.
K2.54008.0 Studio Readout