Specifications

Lite Steadicam Magazine
Lite Mag to Studio Camera Adapter
Lite Shoulder Magazine
18 ARRICAM System Guide
Lite Steadicam Magazine
This 120m/400ft lightweight DC motor magazine is designed for Steadicam
use. Front/back balance is maintained throughout the shot since feed
and take-up shafts are above each other. Extremely small size due to
active displacement. Runs forward only.
Built-in controls include: electronic footage counter, ASA setting and
an ASA display. The footage counter is switchable between meter and
feet. A loop protector is included.
Compatibility: Fits on the ARRICAM Lite, or with Lite Mag to
Studio Camera Adapter on ARRICAM Studio.
K2.54028.0 Lite Steadicam Magazine
Lite Shoulder Magazine
This 120m/400ft lightweight DC motor magazine is designed for hand
held use. A long, angled throat provides better balance and more comfort
while hand holding. Extremely small size due to active displacement.
Runs forward only. Built-in controls include: electronic footage counter,
ASA setting and an ASA display. The footage counter is switchable
between meter and feet. A loop protector is included.
Compatibility: Fits on the ARRICAM Lite, or with Lite Mag to
Studio Camera Adapter on ARRICAM Studio.
K2.54097.0 Lite Shoulder Magazine with Spindle for Film Cores
K2.54165.0 Lite Shoulder Magazine with Collapsible Core
Lite Mag to Studio Camera Adapter
The Lite Mag to Studio Camera Adapter allows the Lite Shoulder Magazine
and the Lite Steadicam Magazine to be mounted on the ARRICAM
Studio in back load position. It is mounted to the camera with six
screws (use 3mm hex key). A small door facilitates film threading.
Compatibility: Only for ARRICAM Studio.
Does not work on ARRICAM Lite or with Studio magazines.
If used with Lite IVS, the handle of the Lite Mag to Studio Camera
Adapter must be taken off, and the Studio Center Handle should
replace the Studio Camera Handle.
K2.54127.0 Lite Mag to Studio Camera Adapter
09 / 2003