Specifications
Dual Port Adapter
Magazine Stabilizing Brackett
Studio Mag to Lite Camera Adapter
ARRICAM System Guide 17
Dual Port Adapter
This magazine adapter allows Studio magazines to be mounted on the
ARRICAM Studio in top load or in an angled back load position.
Magazines can be switched between the two positions without having
to switch adapters.
With a magazine mounted in top load position, the Dual Port Adapter
acts just like the Top Load Adapter. When mounted in the back load
position, the magazine is at a 30° angle. That way even the 300m/1000ft
magazine will clear the top of a geared head.
The Dual Port Adapter is mounted with six screws (use 3mm hex key).
Compatibility: Only for ARRICAM Studio.
Does not work on ARRICAM Lite or with Lite magazines.
The port that is not occupied by the magazine is covered with a light tight
magazine cover which has a removable carrying handle. Old covers cannot
be used since they are not light tight.
The Lite or Lite Universal viewfinders can be used with the Dual Port
Adapter, but the Lite Frameglow and the Lite IVS cannot, since they
interfere with the Dual Port Adapter. Use the Back Load Adapter instead.
K2.54139.0 Dual Port Adapter
Studio Mag to Lite Camera Adapter
When this adapter is attached to the ARRICAM Lite, the camera can
accept Studio magazines. The adapter slides into the Lite camera body
like the Lite magazines and must be fastened with three screws, two on
top and one on the side (use 3mm hex key). The adapter has a small
door to facilitate loading.
Compatibility: Fits only on the ARRICAM Lite.
Accepts Studio Magazine 120/400 and Studio Magazine 300/1000.
K2.54048.0 Studio Mag to Lite Camera Adapter
Magazine Stabilization Bracket
This bracket mounts between the Studio Camera Handle and the
Studio Magazine 300/1000. It provides additional stability for shots
that will put extreme g-forces on camera and magazine.
Compatibility: The Magazine Stabilization Bracket can be used on the
ARRICAM Studio with Studio Camera Handle and Studio Magazine
300/1000 mounted in top load.
K2.54126.0 Magazine Stabilization Bracket
09 / 2003