User guide

EXCHANGING THE VIEWFINDER MOUNTING PLATE
All ARRICAM Viewfinders and 100% Video Tops can be
used for shooting in both formats – Standard 35 and
Super 35.
To align the Viewfinder to the Super 35 centre, the ade-
quate Mounting Plate must be installed. To do so,
unscrew with a 2 mm hex Allen key the plate showing
the STANDARD engraving and replace it by the one
showing SUPER 35. When fixing the plate, be sure that
it fits flush with the camera body – see chapter 1, page
57, fig. 1/19.
EXCHANGING THE FRAME MASK, THE GROUND-
GLASS AND THE FRAMEGLOW MASK
For instructions on inserting Frame Masks into the film
gate for Super 35, see chapter 1, page 64, camera
interiors.
Regarding the Groundglass and the illuminated Format
Markings for this format, see chapter 4, page 152 and
158.
C O N V E RTING THE POWER BRIDGEPLATE TO SUPER 35
See chapter 9 – Camera Supports
3 Perforation/4 Perforation
Conversion
The changing of the movement should be performed in
an ARRICAM Maintenance Centre only.
368
01/2003ARRICAM System Users’ Guide
11 – MISCELLANEOUS