User guide

Remote LED
STAND BY/RUNNING
Remote control signal (e.g. from MCB, WRC) is
provided.
Sync LED
STAND BY/RUNNING
The supplied sync signal is ok.
NOT READY
No useable sync signal is supplied to the SCB.
Cal LED
NOT READY
The lens motors must be recalibrated.
NOT READY
The lens will be calibrated.
BUTTONS
Unlock
While pressing the UNLOCK button, slide the SCB to
the left and take it away. Do not forget to replace the
protecting cover on the camera!
Bright
By pushing the BRIGHT button, you will increase or
decrease the brightness of the displays in 3 steps. The
steps are 1 (low), 2 (medium), 3 (max). Using this button
will not only affect the brightness of the SCB displays
but also the ones on the Camera Control Panel and on
the other ARRICAM Components including the Lens
Data Display.
290
01/2003ARRICAM System Users’ Guide
7 – THE CAMERA CONTROL BOXES