User guide

will delete the selected Mark. If the DELETE button is not
pushed, the frame disappears after 3 sec.
Deleting all Marks
Push the DELETE button for 3 seconds.
Renumbering a Mark
1. Turn the focus ring until the Mark to renumber aligns
with the focus index line.
2. Push the UP/DOWN buttons marked or .
3. This will cycle through the following numbers:
1, 2, 3, 4, 5 , 6, 7, 8, 9.
Since each number has a colour associated, the colours
will also change.
Notice
The Displays will not update existing numbers, so it is
possible to get duplicate numbers.
If a Mark is being set to the number that already exists,
there will be two Marks with the same number. The Dis-
plays will not automatically renumber.
If the index line points to multiple Marks at the same
scale position, the UP or the DOWN buttons will not
renumber them at first, but instead place a solid frame
around the Mark closest to the index line. Then each
further UP or DOWN button push will select another
one of the Marks that are at the same scale position.
The Message Area will display the following alert:
This alert disappears when either the solid or the dotted
frame disappears.
Push SET to choose, UP/DOWN to renumber
266
01/2003ARRICAM System Users’ Guide
6 – THE READOUT UNIT, THE LENS DATA SYSTEM