Technical data

Studio Lens Data Box (LDB)
Lens Data Display (LDD)
Lite Lens Data Box (LDB)
24 ARRICAM System Guide
Studio Lens Data Box (LDB)
Description: The Lens Data Box (LDB) is the central
processing point for the signals from the Lens Control
System (LCS) and from the Lens Data System (LDS). It
controls lens motors, supplies the Lens Data Display
with information and manages the wireless connection
to the LCS hand units for focus, zoom, iris and camera
control. A cable connection to the hand units is possible
with the WHA-2.
Compatibility: The Studio Lens Data Boxes can only
be mounted on the ARRICAM Studio. It can be
attached without the use of tools. Compatible are all
hand units and the Controlled Lens Motor (CLM-2) of
the wireless Lens Control System (WLCS) and the Zoom
Main Unit (ZMU-1) and the Controlled Lens Motor
(CLM-1) of the wired Lens Control System (LCS). The
wired Focus Iris Unit (FIU-1) is not compatible.
Ident-Nr: K2.54014.0
Lite Lens Data Box (LDB)
Description: The Lens Data Box (LDB) is the central
processing point for the signals from the Lens Control
System (LCS) and from the Lens Data System (LDS). It
controls lens motors, supplies the Lens Data Display
with information and manages the wireless connection
to the hand units for focus, zoom, iris and camera con-
trol. The wireless connection can also be replaced by a
cable with the WHA-2.
Compatibility: The Lite Lens Data Box can only be
mounted on the ARRICAM Lite. It can be attached
with a 3 mm hex key. Compatible are all hand units and
the Controlled Lens Motor (CLM-2) of the wireless
Lens Control System (WLCS) and the Zoom Main Unit
(ZMU-1) and the Controlled Lens Motor (CLM-1) of
the wired Lens Control System (LCS). The wired Focus
Iris Unit (FIU-1) is not compatible. The Lite Lens Data
Box is necessary to mount the In-camera Slate Box to
the ARRICAM Lite.
Iden-Nrt: K2.54025.0
Lens Data Display (LDD)
Description: The LDD displays lens ring position and
camera status. Lens ring markings can be displayed in
feet or meters. The LDD graphically shows depth of
field, and allows for the setting, display and storage of
focus marks. It can be used on the camera or remotely,
for instance when the camera is on a crane.
Compatibility: The Lens Data Display can be connected
to the ARRICAM Studio or to the ARRICAM Lite, as
long as the respective Lens Data Box is present. On the
Studio it connects to the Studio Readout, on the Lite it
connects to the Lite Mask Frameglow.
Ident-Nr: K2.54012.0
02 / 2002