Technical data

02 / 2002
Studio Medium Extension
Studio Mask Frameglow
Studio Readout
18 ARRICAM System Guide
Studio Medium Extension
Description: Extends the distance between the Studio
Viewfinder and the eyepiece.
Compatibility: Fits only on Studio Viewfinder. Uses
the ARRIFLEX Eyepiece Leveler.
Ident-Nr: K2.54005.0
Studio Readout
Description: The Readout mounts on top of the Studio
Viewfinder. On the left side it shows camera speed, shutter
angle and exposed film, plus a RUN and a BAT LED.
By pushing the RAW STOCK button, the magazine
raw stock can be displayed. By pushing the BRIGHT
button, the LED display brightness can be adjusted. On
the right side it shows camera speed and a RUN LED.
On top of the Readout is a connector for the Lens Data
Display.
Compatibility: Fits only on the Studio Viewfinder.
Does not fit on Studio 100% Video Top.
Ident-Nr: K2.54008.0
Studio Mask Frameglow
Description: This module attaches to the Studio Viewfinder.
Physical masks slide into the module and determine the
frame lines that are illuminated. The brightness of these
frame outlines can be varied with the DIMMER knob.
Compatibility: Fits only on the Studio Viewfinder. Cannot
be used when the Studio 100% Video Top is attached to
the camera. Except for three masks, the same masks can
be used on the Studio and on the Lite Mask Frameglow.
Ident-Nr: K2.54017.0
Studio LCD Frameglow
Description: This module attaches to the Studio Viewfinder
and provides 4 different types of preset illuminated frame
outlines: Academy (1.37), TV (1.33), HDTV (1.78) and
Wide screen (1.85). Two of them can be on at the same time.
Their brightness can be varied with the DIMMER knob.
Compatibility: Fits only on Studio Viewfinder. Cannot be
used when Studio 100% Video Top is attached to the camera.
Ident-Nr: K2.54007.0
Studio LCD Frameglow