Technical data

Studio Magazine 120/400
Top Load Adapter
Studio Magazine 300/1000
12 ARRICAM System Guide
Studio Magazine 120/400
Description: 120m/400’ displacement magazine, torque
motor driven. Runs forward and reverse. Built-in controls
include: electronic raw stock counter, ASA setting and
ASA display. Includes loop protector.
Compatibility: Can be mounted on top or back of the
ARRICAM Studio (with Top or Back Load Adapter) or
on the back of the ARRICAM Lite (with Lite Magazine
Adapter).
Ident-Nr: K2.54015.0
Studio Magazine 300/1000
Description: 300m/1000’ displacement magazine, torque
motor driven. Runs forward and reverse. Built-in controls
include: mechanical raw stock check, electronic raw stock
counter, ASA setting and ASA display. Includes loop protector.
Compatibility: Can be mounted on top or back of the
ARRICAM Studio (with Top or Back Load Adapter) or
on the back of the ARRICAM Lite (with Lite Magazine
Adapter). When mounted on back of the Studio camera
it interferes with the ARRIHEAD. Cannot be used on
Lite camera with Lite Low Mode Set.
Ident-Nr: K2.54027.0
T op Load Adapter
Description: When this adapter is attached to the
ARRICAM Studio camera, both Studio magazines can be
mounted on top of the camera. It attaches with six screws.
Compatibility: Only for ARRICAM Studio. Does not
work on ARRICAM Lite or with Lite magazines.
Note: If the Lite Viewfinder with Lite IVS is used on
the Studio camera, magazines cannot be top loaded.
Use Back Load Adapter instead. Magazines can be top
loaded if the Lite Viewfinder without Lite IVS and
without Lite Frameglow is used.
Ident-Nr: K2.54045.0
Back Load Adapter
Description: When this adapter is attached to the ARRI-
CAM Studio camera, both Studio magazines can be mounted
on the back of the camera. It attaches with six screws.
Compatibility: Only for ARRICAM Studio. Does not
work on ARRICAM Lite or with Lite magazines. Must
be used if Lite Viewfinder and Lite IVS are attached to
Studio camera. In that case, the Back Load Adapter handle
must be taken off, and the Studio Center Handle should
replace the Studio Camera Handle.
Ident-Nr: K2.54047.0
Back Load Adapter
02 / 2002