Technical data

02 / 2002
ARRICAM Studio
08 ARRICAM System Guide
ARRICAM Studio
Description: The ARRICAM Studio (ST) is a very quiet
35mm sync sound production camera with a thermostat
controlled internal heater. Magazines can be top or back
mounted. The basic controls are built into the camera
control panel (see second picture): RUN button, RUN
LED, PHASE button, fps setting, fps display, shutter
setting and shutter display. The FPS display will also
show warning messages. The exact same controls can be
found on the ARRICAM Lite. Other controls on the
Studio are a DUST CHECK button and a beeper vol-
ume knob. The film gate can accept a format mask and a
gel filter holder. Included in the camera package are:
Studio Viewfinder, Studio Eyepiece, Top Load Adapter,
Film Gate, Filter Holder, Format Mask Set.
Compatibility: Both cameras share the same film gates,
field lenses and ground glasses. The ARRICAM ground
glasses do not fit in MOVIECAM or ARRIFLEX cam-
eras. The film gate format masks and filter holders are
the same as used in ARRIFLEX cameras. The ARRICAM
lens mount accepts all LDS and non-LDS PL mount
lenses for 35 mm film cameras.
Ident-Nr: K0.60001.0
Speed: 1-60 fps forward, 1-32 fps reverse.
Reverse can be set only with Speed
Control Box or Wireless Remote
Controller.
Shutter: electronic shutter from 0° to 180°,
adjustable in 0.1° increments.
Movement: 5-link with dual-pin registration and
dual transport claws, 4 or 3 perf.
Lens Mount: 54mm PL with Lens Data System
contacts. Switchable to Super 35.
Power: 24 Vdc, all fuses are self-resetting.
Sound: less than 20 db/A
ARRICAM Studio Control Panel