User's Manual

15
Scroll to CAT SETTINGS (up or down)
and touch SET.
Scroll to your TCVR family (up or
down) and select baudrate (left or
right), then press SET.
Or select NO CAT and press SET.
If you choose YAESU or ICOM NEW,
after SET pressing you will go to
deeper level which allows you to select
specific type of TCVR. See the
following picture for ICOM NEW
selection, for example.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.