User's Manual

23
Type proper value of the primary
voltage and press ENT.
Press EXIT twice to go back to the
Menu display.
This means not programmable setting of the primary voltage. It is just information for the
processor, which protects the permitted limits ( up or down) for a given value of the primary
voltage (protection circuit).
MEAS pressing shows this screen.
Instantaneous values of the basic
parameters are displayed. You can
FREEZE the screen and measure
AGAIN.
Three different bar graphs can be
defined using BARG1, BARG2 or
BARG3 button.
Press BARG1.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.