User's Manual

25
Now we are in the SERVICE settings
mode.
Scroll to selected line and press
SHOW or SET (depending on the line).
We selected last 20 WARNINGS to
show.
Press EXIT and go to the SET EBS1
AUTO and press SET.
PA will automatically set 20mA of EBS.
You can try to do this manually, too.
Scroll to SET EBS1 MANUAL and
press SET.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.