User`s manual

 '
3646A Programmable Power Supply
ARRAY ELECTRONIC CO.,LTD 2002.3
3646A-TYPE USER’S MANUAL
Fig. 4-2 System Prompt the restart
Login in the identity of “Manager” and then select the quick icon after the system restarts. The dialogue
frame as shown in Fig.4-3 will be displayed.
Fig. 4-3 COM Port and address set
In Fig. 4-3, select the page key “COM” and select the COM port from the pull-down table. If the COM port
does not exit, the system will prompt the diagram as shown in Fig. 4-4. And the “OK” button and the page key
“ADDRESS” are out of work. And vice versa. (And users must be in the identity of the “Manager” otherwise the
“ADDRESS” cannot be used.
4.2 The COM Port and Lower Machine (Power Supply) Address Set
Fig. 4-4 COM Port Failurely Opening Dialogue Frame
Set Default POWER Address:
The system will automatically be in the networking state after the start according to the default COM port and
the default POWER. It is just needed to enter the address in the “Default POWER” bar.
Set POWER Address:
Login in the identity of the “Manager” and select the existing COM port. Then the “ADDRESS” page key
will be available.
Fig. 4-5 POWER Address Set