Installation Guide

Apply Gasket
D.
Tailpiece (C)
Power
Cable (E)
Exterior
Assembly (B)
B.
C.
Mounting Plate
Mounting Plate
Remove Mounting Plate Screw
Use a wrench and in a counter-clockwise motion,
remove the Mounting Plate Screw (BB).
Slide keypad cover up.
Apply Gasket (F).
Slide keypad cover down.
Use a flathead screwdriver to remove the Mounting Plate.
B.
Remove Mounting Plate
C.
Mounting
Plate
Screw (BB)
Exterior
Assembly (B)
Exterior
Assembly (B)
5. Install Lock Assemblies
A.
A.
Deadbolt Installation Instructions
For door with bore hole 2-1/8" diameter
proceed to STEP D.
For door with bore hole 1-1/2" diameter follow Steps B
and C for Mounting Plate Screw (BB) and Mounting Plate
removal.
Bore Hole
2-1/8"
diameter
Door Bore Hole Options
Bore Hole
1-1/2"
diameter
OR
Mounting
Plate
Screw (BB)
Mounting
Plate
Option 1
Option 2
6
A.
2
3
2
2
3
Gasket (F)
Gasket
(F)
Gasket
(F)
Latch bolt MUST
be in the retracted
position.
IMPORTANT: