Installation Guide

Tools you will need: Tools you may need:

Compatible Devices:

IMPORTANT INSTALLATION NOTES. PLEASE READ:

• Remove the battery from the battery compartment and charge it in the

Charging Cradle until the LED turns green.

• The Array By Hampton

™

connected door lock has a built-in solar panel that

will charge the battery if positioned in direct sunlight. If unable to position

the connected door lock in direct sunlight, you may need to charge the

battery more frequently. You will see the battery status on the app.

• Do not attempt to disassemble any internal components of the connected

door lock. You may void the warranty. Please see warranty details printed

on the last page of the installation instructions.

• Do not install the battery until you’ve installed the connected door lock and

downloaded the app. Follow the instructions in order.

• Do NOT use a power drill to install the connected door lock. A power drill

should only be used for door preparation.

• Make sure your door is properly aligned and can be closed without pushing,

pulling or lifting the door.

Note: New devices will continue to be added to enhance your experience with

the

Array By Hampton

™

connected door lock. Please visit our website