Specifications

THE X-MIXER DIGITAL CONSOLE
17
PC Setup Software
Setup software for a Windows compatible PC computer is supplied with the console. The software has integrated Help. Refer to the integrated
Help for detailed instruction on use of the software.
The PC is connected to the console through an RS232 serial connection. Computers without RS232 connections built-in may use an external
USB to RS232 device.
Miscellaneous Setup Page
The Miscellaneous Setup page is displayed below.
(1) Autocue [enable or disable]
(2) Autocue Attenuation [dB ducking of CR monitor signal below cue]
(3) In-hand setting [prefader level for Cue and Off-line mix]
Factory Service Use only: do NOT use without contacting the customer service dept.
(1) Command Line Terminal [RS232 terminal window for hand entered commands]
(2) Firmware Update [update software on the motherboard]
(3) Sine Wave Output [test sine wave output]
NOTE: this software may be updated from time to time due to new features. Refer to the integrated Help supplied with your console for a current
description of this software.