Specifications

THE X-MIXER DIGITAL CONSOLE

PC Setup Software

Setup software for a Windows compatible PC computer is supplied with the console. The software has integrated Help. Refer to the integrated

Help for detailed instruction on use of the software.

The PC is connected to the console through an RS232 serial connection. Computers without RS232 connections built-in may use an external

USB to RS232 device.

Position Setup Page

The Position Setup page is displayed below. The software will display 14 fader channels.

This page selects for each fader channel:

(1) Source input [mic, analog line, digital, remote],

(2) Fader trim calibration [channel gain],

(3) Source logic [pulsed or sustained],

(4) Misc setup [specific to the type of source input selected],

(5) Off-line mix [bus assignment],

(6) Reset Timer [auto reset timer to 0 when channel on]

NOTE: this software may be updated from time to time due to new features. Refer to the integrated Help supplied with your console for a current

description of this software.