Product manual

I N S TA L L A T I O N I N S TR U C T I O N S
Microphones
STEP 5- CONNECT A MIC TO THE CONSOLE
Using a mic to XLR cable, connect a mic to the Mic 1 input on the console.
Turn Channel One on (the red LED should be on) and set the channel one fader to the in hand position (middle). If the mic itself has an on/off switch, then turn
it on.
TEST- Speak into the microphone and the console VU meters should follow your voice. There should be no audio out of the monitor speakers (they are muted
to eliminate feedback) but there should be audio in the Headphones.
If mic level is low, use a small screwdriver to adjust the 25 turn trimpot on the back of the console located next to the mic XLR connector.
STEP 5- CONNECT A MIC TO THE CONSOLE
MIC ONEMIC TWO
Connect a mic to the
XLR mic inputs and
test the mic
into the headphones
4.6
ARC-8
Mic 1
In
Mic 2
In In In In
Ch 5 Ch 4 Ch 3
48V
Mic
Pwr
L
R
L
R
L
R
Ch 5
Ch 4 Ch 3
In In In
Ch 8 Ch 7 Ch 6
L
R
L
R
L
R
Ch 7
Ch 6
PC
USB
Ch 8
Pgm Left Pgm Right
Out Out
Mon
Out
Out
Pgm
In
Ext
L
R
Ch 7
Mix
Minus
Out
+12V Main
DC Power
Out
HP
Bal
In
Bal
In
Bal
In
Bal
In
Bal
In
Mute
Logic
L
R
L
R
Mic level
trimpots
(25 turn)